Prof. Chun-Ying Lee

 

Office: Integrated Complex Building 613-C

Phone: (02) 27712171 ext. 2070

(02) 87731614

Fax: (02) 27317191

E-mail : leech@ntut.edu.tw

 

Education

Diploma, Dept. of Mechanical Engineering, Natl. Taipei Inst. of Tech., 1980.6

Master of Science, Dept. of Mechanical Engineering, Natl. Sun Yat-sen Univ., 1985.6

Ph. D. of Engineering Mechanics, Michigan State Univ., 1991.6

 

Area of research interest: Surface modification using electrodeposition, smart materials and applications, structural analysis of composite laminates, finite element analysis

 

A .Journal Papers

1.      H. E. Lin*, C. H. Ho, C. Y. Lee, 2017, “Discharge Performance of Zinc Coating Prepared by Pulse Electroplating with Different Frequencies for Application in Zinc-Air Battery,” Surface and Coatings Technology, accepted.(SCI)

2.      C.-Y. Lee*, J.-H. Lin, 2017 "Incorporating Piezoelectric Energy Harvester in Tunable Vibration Absorber for Application in Multi-modal Vibration Reduction of A Platform Structure," Journal of Sound and Vibration, 389, 73-88.(SCI)

3.      J.-G. Hong, C.-Y. Lee*, 2017, “Development of a Real-time Measurement Device for Monitoring the Internal Stress during Electroplating,” Experimental Techniques, 41(1), 51-57. (SCI)

4.      Chih-Jer Lin*, Chun-Ying Lee, and Ting-Yu Chen, 2016, “Vibration control of a structure using a shape memory material absorber based on fuzzy system,” Applied System Innovation, Edited by Teen-Hang Meen, Stephen Prior, and Artde Donald Kin-Tak Lam, CRC Press 2016, Pages 971–975. Also in Proceedings of the 2015 International Conference on Applied System Innovation (ICASI 2015), May 22-27, 2015, Osaka, Japan.

5.      H. H. Sheu, H. B. Lee*, S. Y. Jian, C. Y. Hsu, C. Y. Lee, 2016, ”Investigation on the Corrosion Resistance of Trivalent Chromium Conversion Passivate on Electroplated Zn-Ni Alloy,“ Surface and Coatings Technology, 305, 241-248. (SCI)

6.      Chun-Ying Lee*, Chung-An Pai, 2016, “Design and Implementation of Tunable Multi-DOF Vibration Absorber Made of Hybrid Shape Memory Helical Springs,Journal of Intelligent Material Systems and Structures, 27(8), 1047-1060. (SCI)

7.      Chun-Ying Lee*, Kuan-Hui Cheng, Mei-Wen Wu, 2015, “The Mechanical and Electrochemical Properties of DC-Electrodeposited Ni-Mn Alloy Coating with Low Internal Stress,International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 9(7), 1281-1284.

8.      Chun-Ying Lee* and Chun-Yuan Chen, 2015, “Experimental Application of a Vibration Absorber in Structural Vibration Reduction Using Tunable Fluid Mass Driven by Micropump,” Journal of Sound and Vibration, 348(1), 31-40. (SCI)

9.      Kuan-Hui Cheng, Fu-Je Chen, Chun-Ying Lee*, Chao-Sung Lin, Jung-Tang Huang, Chang-Cheng Lan, Ping-Huan Tsou, Tzu-I Ho, 2014, “Fabrication of Ni-Mn Micro-Probe Structure with Low Internal Stress and High Hardness by Employing DC Electrodeposition,” Advances in Materials Science and Engineering, http://dx.doi.org/10.1155/2014/890814. (SCI)

10.  Chiang-Ho Cheng*, An-Shik Yang, Chih-Jer Lin, Chun-Ying Lee, 2014, “Development of a New Piezoelectrically Actuated Micropump for Liquid and Gas,” International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 8(7), 1192-1197.

11.  Chih-Jer Lin*, Chun-Ying Lee, Ying Liu, Chiang-Ho Cheng, 2014, “Interval Type-2 Fuzzy Vibration Control of an ERF Embedded Smart Structure,” International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 8(7), 1215-1221.

12.  Chun-Ying Lee*, Mei-Wen Wu, Li-Yi Cheng, Chiang-Ho Cheng, 2014, “The Effects of NaF Concentration on the Zinc Coating Electroplated in Supercritical CO2 Mixed Zinc Chloride Bath,” International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 8(7), 657-662.

13.  Kun-Cheng Peng*, Yi-Chung Lin, Shiu-Jen Liu, Tai-Er Chen, Chun-Ying Lee, 2013, “Mn-Doped Zn2SiO4 Thin Film with Green Fluorescence Enhanced by Ag Nano-Island Surface Plasmon Effect,” Japanese Journal of Applied Physics, http://dx.doi.org/10.7567/JJAP.52.11NJ03. (SCI)

14.  Chun-Ying Lee*, Mei-Wen Wu, Van Cuong Nguyen, and Hung-Wei Chuang, 2013, “Current Density Effect on Nickel Electroplating Using Post Supercritical CO2 Mixed Watts Electrolyte,” International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 7(7), 488-493.

15.  Chih-Jer Lin*, Chun-Ying Lee, Chiang-Ho Cheng, and Geng-Fung Chen, 2013, “Vibration Control of a Cantilever Beam Using a Tunable Vibration Absorber Embedded with ER Fluids,” International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 7(7), 476-482.

16.  Li-Yu Tseng, An-Shik Yang*, Chun-Ying Lee and Chiang-Ho Cheng, 2013, “Investigation of a piezoelectric valveless micropump with an integrated stainless steel diffuser/nozzle bulge-piece design,” Smart Materials and Structures, 22 (2013) 085023, doi:10.1088/0964-1726/22/8/085023. (SCI)

17.  Chih-Jer Lin, Her-Terng Yau*, Chun-Ying Lee, Kai-Hung Tung, 2013, “System Identification and Semi-active Control of a Squeeze-mode Magneto-rheological Damper,” IEEE/ASME Trans. Mechatronics, 18(6), 1691- 1701. (SCI)

18.  Hung-Bin Lee, Jiun-Chen Tsau, Chun-Ying Lee*, 2013, “HER Catalytic Activity of Electrodeposited Ni-P Nanowires under the Influence of Magnetic Field,” Journal of Nanomaterials, Vol. 2013 (2013), Article ID 191728, doi:10.1155/2013/191728. (SCI)

19.  C. V. Nguyen, C. Y. Lee*, F. J. Chen, C. S. Lin, L. Chang, 2013, “An Electroplating Technique using the Post Supercritical Carbon Dioxide Mixed Electrolyte,” Surface & Coatings Technology, 232, 234-239. (SCI)

20.  Tsung-Han Tan, Mei-wen Wu, and Chun-Ying Lee*, 2013, “Effect of Annealing Temperature on the Mechanical Properties and the Spherical Indentation of NiTi Shape Memory Alloy,” Lecture Notes in Electrical Engineering 234, 765-772.

21.  C. V. Nguyen, C. Y. Lee*, L. Chang, F. J. Chen, C. S. Lin, 2012, “The relationship between nano crystallite structure and internal stress in Ni electrodeposited films plated by the supercritical CO2 method,” Journal of The Electrochemical Society, 159(6), D393-D399. (SCI)

22.  C. Y. Lee*, C. C. Chen, T. H. Yang and C. J. Lin, 2012, “Structural Vibration Control Using a Tunable Hybrid Shape Memory Material Vibration Absorber,” Journal of Intelligent Material System and Structure, 23(15), 1725-1734. (SCI)

23.  V. C. Nguyen, C. Y. Lee*, F. J. Chen, C. S. Lin, and T. Y. Liu, 2012, "Study on the internal stress of nickel coating electrodeposited in an electrolyte mixed with supercritical carbon dioxide," Surface & Coatings Technology, 206(14), 3201-3207.(1/1) (SCI)

24.  Y. C. Huang*, C. Y. Lee, and C. R. Chen, 2012, “Theoretical and Experimental Design of a New Flexible Hinged Positioning Stage,Journal of Chinese Society of Mechanical Engineers, 33(1), 59-66. (SCI)

25.  C.-Y. Wen*, J.-L. Jian, C.-Y. Lee and W.-S. Kuo, 2011, “Design Methodology for the Minimization of Contact Width between Pressure Lip Seal and Shaft,” Journal of Chinese Society of Mechanical Engineers,32(5), 51-60.

26.  L.-H. Yi, C.-Y. Lee, L. Chang*, T.-J. Lee and P.-W. Kao, 2011, “Analyzing mechanical properties of a nanocrystalline Fe-Ni coating by nanoindentation,” Journal of Materials Research, 26(19), 2533-2542. (SCI)

27.  L. Y. Tseng, A. S. Yang*, C. Y. Lee, and C. Y. Hsieh, 2011, “CFD-based Optimization of a Diamond-Obstacles Inserted Micromixer with Boundary Protrusions,” Engineering Applications of Computational Fluid Mechanics, 5(2), 210-222. (SCI)

28.  C. S. Hsu, H. B. Lee, C. S. Lin, C. Y. Lee*, 2011, “The Electrocatalytic Activity of Electrodeposited Ni-P Micro-patterned Structure in Acidic Solution,Journal of Chinese Society of Mechanical Engineers, 32(2), 103 -109. (SCI)

29.  H. B. Lee, C. S. Lin, D. S. Wuu, C. Y. Lee*, 2011, “Wear and corrosion investigation on the electrodeposited Ni-P coating,” Tribology Transactions, 54(4), 497-504. (SCI)(1/0)

30.  H. B. Lee, D. S. Wuu*, C. Y. Lee and C. S. Lin, 2011, “Synergy between Corrosion and Wear of Electrodeposited Ni-P Coating in NaCl Solution,” Tribology International, 44(12), 1603-1609. (SCI)

31.  C. Y. Wen*, C. Y. Lee, H. Y. Yu, H. T. Chang, 2011, “A Novel Inflatable Belt-Type Clamp in Open Heart Surgery,” Journal of Mechanics, 27(1), 57-62. (SCI)

32.  F. J. Chen, Y. N. Pan, C. Y. Lee, and C. S. Lin*, 2010,” Internal Stress Control of Nickel-Phosphorus Electrodeposits using Pulse Currents,” Journal of The Electrochemical Society, 157 (3), D154-158. (SCI)

33.  H. B. Lee, D. S. Wuu*, C. Y. Lee and C. S. Lin, 2010, “Study of the Corrosion Behavior of Nanocrystalline Ni-P Electrodeposited Coating,” Metallurgical and Materials Transactions A, 41A, 450-459. (SCI)

34.  C. S. Hsu, H. B. Lee, C. S. Lin, C. Y. Lee*, 2010, “Study on the electrodeposition of Ni-P nanowires and their electrocatalytic properties,” Metallurgical and Materials Transactions A, 41A, 768-774. (SCI)

35.  H. B. Lee, D. S. Wuu*, C. Y. Lee and C. S. Lin, 2010, “Wear and Immersion Corrosion of Ni-P Electrodeposit in NaCl Solution,” Tribology International, 43, pp.235-244.(SCI)

36.  C. Y. Lee* and D. Liu, 2009, “Effect of impact velocity on the indentation of thick composite laminate,” Experimental Techniques, 33(4), 59-64. (SCI)

37.  C.Y. Lee*, H. C. Zhuo and C. W. Hsu, 2009, “Lateral vibration of a composite stepped beam consisted of SMA helical spring based on equivalent Euler-Bernoulli beam theory,” Journal of Sound and Vibration, 324(1-2), 179-193. (SCI)(2/0)

38.  C. Y. Lee*, C. S. Lin and B. R. Lin, 2008, “Localized electrochemical deposition process improvement by using different anodes and deposition directions,” Journal of Micromechanics and Microengineering, 18(10), paper no. 105008. (SCI)

39.  L.D. Liu, S.F. Hsieh, C.Y. Lee and C.S. Lin*, 2008, "Microstructural Evolution of Anodic Coating on AZ31 Magnesium Alloy in Alkaline Silicate Solution," Journal of The Electrochemical Society, 155(7), C307-C314.(SCI)

40.  I. C. Cheng, E. G. Fu, L.D. Liu, C. Y. Lee and C. S. Lin*, 2008, “Effect of Fluorine Anions on Anodizing Behavior of AZ91 Magnesium Alloy in Alkaline Solutions,” Journal of The Electrochemical Society, 155(5), pp. C219-C225. (SCI)

41.  C. S. Lin*, C. Y. Lee, F. J. Chen, C. T. Chien, P. L. Lin and W. C. Chung, 2006, “Electrodeposition of Nickel-Phosphorus Alloy from Sulfamate Baths with Improved Current Efficiency,” Journal of The Electrochemical Society, 153(6), pp.C387-C392. (SCI)

42.  C. S. Lin*, C. Y. Lee, W. C. Li, Y. S. Chen and G. N. Fang, 2006, “Formation of Phosphate/Permanganate Conversion Coating on AZ31 Magnesium Alloy,” Journal of The Electrochemical Society, 153(3), pp.B90-B96. (SCI)

43.  C. Y. Lee*, R. Q. Jian, C. S. Lin and C. Y. Wen, 2006, “Simulation and Experimentation on the Contact Width and Pressure Distribution of Lip Seals,” Tribology International, 39, pp.915-920. (SCI)

44.  C. S. Lin*, C. Y. Lee, T. F. Chang and T. H. Chang, 2006, “Annealing Behaviors of Electrodeposited Ni-TiO2 Composite Coatings,” Surface and Coatings Technology, 200(12-13), pp.3690-3697. (SCI)

45.  C. S. Lin*, C. Y. Lee, J. H. Yang, and Y. S. Huang, 2005, “Improved Copper Microcolumn Fabricated by Localized Electrochemical Deposition,” Electrochemical and Solid-State Letters, 8(9), C125-C129. (SCI)

46.  C. S. Lin, C. Y. Lee, F. G. Chen and W. C. Lee, 2005, “Structural Evolution and Internal Stress of Nickel-Phosphorus Electrodeposits,” Journal of The Electrochemical Society, 152(6), pp.C370-C375. (SCI)

47.  C. Y. Lee, K. L. Jwo, and M. W. Wu, 2003, “A Study on the Dynamic Characteristics of An ER Fluid Controlled Displacement Transmitter with Two Output Units,” Journal of Intelligent Material Systems and Structures, 14(6), pp.393-403. (SCI)

48.  C. Y. Lee, G. Z. Chao, and J. D. Wu, 2002, “Effect of Curvature on the Flow of an Electrorheological Fluid Through an Annular Duct,” The Journal of the Chinese Society of Mechanical Engineers, 23(4), pp.345-353. (SCI)

49.  C. Y. Lee and C. Y. Tseng, 2002, “The Droplet Ejection of An Inkjet Mechanism Controlled by Electrorheological Fluid,” Materials and Design, 23, pp.727-739. (SCI Extended)

50.  C. Y. Lee and C. Y. Wen, 2002, “The Oscillatory Squeeze Flow of Electrorheological Fluid Considering the Inertia Effect,” Smart Materials and Structures, 11, pp.553-560. (EI, SCI Extended)

51.  J. D. Wu, C. K. Chen, C. Y. Lee and T. H. Lee, 2002, “Experimental Investigation of Active Noise Controller for Internal Combustion Engine Exhaust System,” Japanese Journal of Applied Physics, 41(10), pp.6228-6235. (SCI)

52.  C. Y. Lee and K. L. Jwo, 2001, “Experimental Study on Electro-Rheological Material with Grooved Electrode Surfaces,” Materials and Design, 22(4), pp.277-283. (SCI Extended)

53.  C. Y. Lee and W. C. Liao, 2000, “Characteristics of Electro-Rheological Fluid Valve Used in An Ink-Jet Printhead,” Smart Materials and Structures, 9(6), pp.839-846. (EI, SCI Extended)

54.  C. Y. Lee and C. C. Cheng, 2000, “Complex Moduli of Electrorheological Material under Oscillating Shear,” International Journal of Mechanical Sciences, 42(3), pp.561-573. (SCI, EI)

55.  C. Y. Lee and C. C. Huang, 1999, “Evaluation of Interlaminar Shear Stress by Strain Measurements on Laminate Surfaces,” The Chinese Journal of Mechanics, 15(3), pp.127-135. (SCI,EI)

56.  C. Y. Lee and C. C. Cheng, 1998, “Dynamic Characteristics of Sandwich Beam with Embedded Electro-Rheological Fluid,” Journal of Intelligent Material Systems and Structures, 9(1), pp.60-68. (SCI)

57.  C. Y. Lee and C. H. Shu, 1998, “Layer Reduction Technique in the Interlaminar Shear Stress Analysis of Laminated Cylindrical Shells”, The Journal of the Chinese Society of Mechanical Engineers, 19(4), pp.433-439.(SCI)

58.  C. Y. Lee and J. M. Chen, 1996, “Interlaminar Shear Stress Analysis of Composite Laminate with Layer Reduction Technique”, International Journal for Numerical Methods in Engineering, 39, pp.847-865. (SCI, EI)

59.  C. Y. Lee, 1995, “Finite Element Formulation of a Sandwich Beam with Embedded Electro-Rheological Fluids”, Journal of Intelligent Material Systems and Structures, 6(5), pp.718-728. (SCI)

60.  C. Y. Lee, B. S. Thompson, M. V. Gandhi and S. B. Choi, 1994, “A Variational Formulation for the Finite Element Analysis and Control of Linkage and Robotic Systems Featuring Smart Materials Incorporating Piezoelectric Materials,” Journal of Applied Mechanisms, 1(3), pp.1-16.

61.  C. Y. Lee and D. Liu, 1993, “Nonlinear Analysis of Composite Plates Using Interlaminar Shear Stress Continuity,” Composites Engineering, 3(2), pp.151-168. (SCI, EI)

62.  D. Liu, C. Y. Lee and X. Lu, 1993, “Repairability of Impact-Induced Damage in SMC Composites,” Journal of Composite Materials, 27(13), pp.1257-1271. (EI)

63.  J.-H. Kuang and C. Y. Lee, 1993, “Recycled Guyan condensation method for the structural dynamic analysis,” Journal of the Chinese Society of Mechanical Engineers, 14 (6), pp. 553-560

64.  C. Y. Lee, D. Liu and X. Lu, 1992, “Static and Vibration Analysis of Laminated Composite Beams with an Interlaminar Shear Stress Continuity Theory,” International Journal of Numerical Methods in Engineering, 33, pp.409-424. (SCI, EI)

65.  C. Y. Lee and D. Liu, 1992, “An Interlaminar Stress Continuity Theory for Laminated Composite Analysis”, Computers & Structures, 42(1), pp.69-78. (SCI, EI)

66.  C. Y. Lee and D. Liu, 1992, “Layer Reduction Technique for Composite Laminate Analysis,” Computers & Structures, 44(6), pp.1305-1316. (SCI, EI)

67.  C. Y. Lee and D. Liu, 1992, “Interlaminar Stress Continuity Theory for Laminated Composite Analysis,” AIAA Journal, 29(11), pp.2010-2012. (SCI, EI)

68.  C. Y. Lee, M. Pfeifer, B. S. Thompson, and M. V. Gandhi, 1989, “The Characterization of Elastic Moduli and Damping Capacities of Graphite/Epoxy Composite Laminated Beams in Hygrothermal Environments,” Journal of Composite Materials, 23(8), pp.819-845. (SCI)

69.  S. B. Choi, M. V. Gandhi, B. S. Thompson, and C. Y. Lee, 1988, “An Experimental Investigation of an Articulating Robotic Manipulator with a Graphite-Epoxy Composite Arm,” Journal of Robotic Systems, 5(1), pp.73-79. (SCI, EI)

70.  C. Y. Lee, B. S. Thompson and M. V. Gandhi, 1988, “Temperature-dependent Dynamic Mechanical Properties of Polymeric Laminated Beams,” Journal of Engineering Materials and Technology, 5(1), pp.174-179. (SCI)

71.  C. K. Sung, B. S. Thompson, M. V. Gandhi and C. Y. Lee, 1988, A Methodology for Synthesizing Symmetric Laminated Beams with Optimal Elastodynamic Response Characteristics, International Journal of Mechanical Science, 29(12), pp.821-830. (SCI, EI)

 

B. International Conference Papers

1.      Chun-Ying Lee, Kai-You Jhang and Mei-wen Wu, 2016, “Photoluminescence of ZnO Film Prepared by Annealing Zn Coating Electrodeposited in Post-Supercritical CO2 Mixed Sulfate Bath,” Proceedings of 2016 ICENS-Summer, Jul. 12-14, 2016, Kyoto, Japan, 51-62.

2.      Jyun-Rong Zhuang, An-Shik Yang, Chun-Ying Lee, Wen-Hsin Hsieh, Chiang-Ho Cheng, 2016, “Development of a FEM-based Thermal Model for a High Speed Spindle System,” Proceedings of 2016 ICENS-Summer, Jul. 12-14, 2016, Kyoto, Japan, 221-230.

3.      Chih-Jer Lin, Chun-Ying Lee, Yong-Sheng Li, 2016, “Study of Vibration Control Using a Tunable Vibration Absorber Made of Hybrid Shape Mem­ory Helical Springs,” Proceedings of 2016 ICENS-Summer, Jul. 12-14, 2016, Kyoto, Japan, 437-451.

4.      Jyun-Gao Hong, Chun-Ying Lee and Mei-wen Wu, 2015, ”A Device for Measuring the Internal Stress Evolution during Electroplating,” Proceedings of the 9th IPS-International Collaboration Symposium on Information, Production and Systems, Nov. 16-18, 2015, Kitakyushu, Fukuoka, Japan, 267-270.

5.      Shih-Yu Hu, Jin-Yu Tong, Yun-Ting Liao, Kui-Ting Chen, Chun-Ying Lee, Takaaki Baba, 2015, “Advanced Driving Assistant System (ADAS) based on Kalman Filter for Heavy Fog Condition,” Proceedings of the 9th IPS-International Collaboration Symposium on Information, Production and Systems, Nov. 16-18, 2015, Kitakyushu, Fukuoka, Japan, 124-126.

6.      Chun-Ying Lee, Kuan-Hui Cheng, Mei-Wen Wu 2015, “The Mechanical and Electrochemical Properties of DC-Electrodeposited Ni-Mn Alloy Coating with Low Internal Stress,ICMAAE 2015: 17th International Conference on Mechanical, Aeronautical and Automotive Engineering, Paris France, July 20-21.

7.      Chun-Ying Lee, Mei-Wen Wu, Li-Yi Cheng, Chiang-Ho Cheng, 2014, “The Effects of NaF Concentration on the Zinc Coating Electroplated in Supercritical CO2 Mixed Zinc Chloride Bath,ICMSMM 2014: International Conference on Materials Science, Metals and Manufacturing, Prague Czech, July 10-11.

8.      Kun-Cheng Peng, Hao-Che Kao, Shiu-Jen Liu, Chun-Ying Lee, 2014, “Annealing effect on the microstructure and optical characteristics of Mn, Si co-doped ZnO thin film sputtered on quartz glass,” The 7th International Conference on Technological Advances of Thin Films & Surface Coatings,

9.      Kun-Cheng Peng, Keng-Lin Hsieh, Shiu-Jen Liu, Chun-Ying Lee, 2014, “Annealing effects on the green fluorescence of Al-doped Zn2SiO4 thin film deposited with biased RF voltage,” The 7th International Conference on Technological Advances of Thin Films & Surface Coatings,

10.  Van-Cuong Nguyen and Chun-Ying Lee, 2014, “High Hardness of Nickel Film Electroplated in Atmospheric Pressure with the Post Supercritical CO2 Solution,” 15th International Symposium on Eco-materials Processing and Design, ISEPD2014, Jan. 12-15, Hanoi, Vietnam, Paper No. DI=01

11.  Chung-An Pai and Chun-Ying Lee, 2013, ”Vibration Reduction Using Smart Helical Spring as Tunable Vibration Absorber in Multi-DOF System,” Proceedings of the 7th IPS-International Collaboration Symposium, Nov. 11-13, 2013, Kitakyushu, Fukuoka, Japan, Paper No. PS-607.

12.  Kun-Hsien Lee, Hung-Wei Chung, Chun-Ying Lee, 2013, “Mechanical Properties of Ni Coating Electroplated in Post-SC-CO2 Mixed Watts Bath,” Proceedings of the 7th IPS- International Collaboration Symposium, Nov. 11-13, 2013, Kitakyushu, Fukuoka, Japan, Paper No. PS-621.

13.  Chih-Jer Lin*, Chun-Ying Lee, Chiang-Ho Cheng and Geng-Fung Chen, 2013, “Vibration Control of a Cantilever Beam Using a Tunable Vibration Absorber Embedded with ER Fluids” ICAMAME 2013: International Conference on Aerospace, Mechanical, Automotive and Materials Engineering, July 15-16 2013, Stockholm, Sweden.

14.  Chun-Ying Lee*, Mei-Wen Wu, Van Cuong Nguyen, and Hung-Wei Chuang, 2013, “Current Density Effect on Nickel Electroplating Using Post Supercritical CO2 Mixed Watts Electrolyte,” ICAMAME 2013: International Conference on Aerospace, Mechanical, Automotive and Materials Engineering, July 15-16 2013,  Stockholm, Sweden.

15.  Kun-Cheng Peng*, Yi-Chung Lin, Shiu-Jen Liu, Tai-Er Chen, Chun-Ying Lee,Mn-doped Zn2SiO4/Ag nano-islands for green fluorescence thin film enhanced by surface plasmon effect,” ISPlasma 2013, January 28- February 1, Nagoya, Japan. (P2014C)

16.  Kun-Cheng Peng*, Hao-Che Kao, Shiu-Jen Liu, Ji-Huan Chen, Chun-Ying Lee, “Annealing effect on the microstructure and optical characteristics of Mn, Si co-doped ZnO thin film sputtered on quartz glass,” ISPlasma 2013, January 28- February 1, Nagoya, Japan. (P2069A)

17.  Tsung-Han Tan, Mei-wen Wu, and Chun-Ying Lee*, 2012, “Effect of Annealing Temperature on the Mechanical Properties and the Spherical Indentation of NiTi Shape Memory Alloy,” 1st International Conference on Intelligent Technologies and Engineering Systems, Changhua, Taiwan , December 13-15

18.  Van-Cuong Nguyen, Mei-wen Wu, An-Shik Yang and Chiang-Ho Cheng, Chun-Ying Lee*, 2012, “Feasibility of using post supercritical CO2 mixed electrolyte for nano-crystalline nickel electrodeposition”, The Third International Conference on Sensor Device Technologies and Applications, August 19-24, Rome, Italy.

19.  Van-Cuong Nguyen*, Chun-Ying Lee and Mei-wen Wu, 2011, “Effect of electroplating parameters and additives on the internal stress of Ni deposits plated in supercritical CO2 method,” Annual International Conference on Materials Science, Metal & Manufacturing, December 12-13, Singapore.

20.  A. S. Yang, C. Y. Lee*, L. Y. Tseng, S. K. Liao, 2011, “Development of a Novel SMA-Tuned Micromixer,” 3rd Conference on Ferromagnetic Shape Memory Alloys, July 18-22, Dresden, Germany.

21.  C. S. Hsu, H. B. Lee, C. S. Lin, C. Y. Lee, 2010, “The Effect of Process Parameters and Coating Characteristics on the HER Property of Electrodeposited Ni-P Alloy,” The 5th National Conference on Hydrogen Energy and Fuel Cell December 17-18, 2010, Tainan.

22.  Mei-Chen Yueh, Chun-Ying Lee, Sana Ashraf, 2010, “Mechanical Behavior of A SMA Helical Spring with Two-Way Shape Memory Effect,” Proceeding of 2010 Conference on Precision Machinery and Manufacturing TechnologyPMMT 2010, Paper No. A93.

23.  C.Y. Lee*, C.H. Hsu, M.W. Wu, 2010, “The HER property of electrodeposited Ni-P electrode with micro-patterned structure,” 2010 International Conference on Optics, Photonics and Energy Engineering, May 10-11, Wuhan, China, pp.1-4.

24.  C. Y. Lee*, T. H. Yang, and M. W. Wu, 2009, “Vibration Tuning of A Platform Suspended by Hybrid Shape-Memory Helical Springs,” Proceedings of the 16th International Congress on Sound and Vibration, July 5-9, Krakow, Poland.

25.  C. Y. Lee*, T. H. Yang and M. W. Wu, 2008, “Vibration Tuning of a Composite Helical Spring Fabricated with Polymeric Sleeved Wire,” Proceedings of the 15th International Congress on Sound and Vibration, July 6-10, Daejeon, Korea, pp. 2987-2994.

26.  L.D. Liu, S.F. Hsieh, C.Y. Lee, and C.S. Lin, 2008, “Microstructural Evolution of Anodic Coating on AZ31 Magnesium Alloy in Alkaline Silicate Solution,” 213th Electrochemical Society Meeting, Phoenix, Arizona, May 18- 22.

27.  B.R. Lin, C.Y. Lee*, and C.S. Lin, 2008, “Localized Electrochemical Deposition Process Improvement and Fabrication of Three-Dimensional Structure,” The 8th International Workshop on Micro Fabrication, Kaohsiung, Taiwan, April 29- May 1, pp.99-103.

28.  C. Y. Lee, C. W. Hsu and S. F. Hsieh, 2007, “The Dynamic Characteristics of SMA Helical Spring in Axial Vibratory Motion,” Proceedings of the 14th International Congress on Sound and Vibration, July 9-12, Cairns, Australia.

29.  C. Y. Lee, C. S. Lin and H. C. Zhuo, 2006, “Dynamic Characteristics of Platform with SMA Helical Spring Suspension,” Proceedings of the 13th International Congress on Sound and Vibration, July 2-7, Vienna, Austria.

30.  W. Li, W. Li, Y. Chu, C. Lin and C. Lee, "Color and Corrosion Resistance of Phosphate/Permanganate Conversion Coating on AZ31 Magnesium Alloy," 209th Meeting of The Electrochemical Society, Denver, Colorado, May 7 - May 12, 2006.

31.  C. Y. Lee, B. Raju, D. Templeton, and D. Liu, “Impact-Induced Failure Mechanisms in Composites with Various Microstructures,” Proceedings of SEM Annual Conference, Portland, Oregon, June 6-9, 2005.

32.  B. S. Thompson, M. V. Gandhi and C.Y. Lee, 1989, “A Variational Formulation for Smart Structural Members of Robotic and Mechanism Systems Featuring Embedded Electro-Rheological Fluids, Proc. 1st National Applied Mechanisms & Robotics Conference, paper no. AMR-2C-1, Cincinnati, Ohio.

33.  C.Y. Lee, S. B. Choi, B. S. Thompson and M. V. Gandhi, 1989, “A Variational Formulation for the Finite Element Analysis and Control of Linkage and Robotic Systems Featuring Smart Materials Incorporating Piezoelectric Materials, Proc. 1st National Applied Mechanisms & Robotics Conference, paper no. AMR-2C-2, Cincinnati, Ohio.

 

C. Patent

1.    Dahsin Liu, Chun-Ying Lee, Chia-Fong Yen, Corey Anderson, Guojing Li, “Composite structure and method of making a composite structure,” U.S. Patent 9273993B2, March 1, 2016.