Boss

PH.D

Master

Grad

 

cysu
Cherng-Yuh Su 蘇 程 裕
Professor


National Taipei University of Technology

Graduate Institute of Manufacyuting Technology

1, Sec. 3, Chung-hsiao E. Rd., Taipei,10608,Taiwan, R.O.C.,
Department of Mechanical Engineering, room 424
TEL: 02-2771-2171 ext.2044
E-mail: cysu@ntut.edu.tw

專長

奈米結構材料製程,表面工程,軟硬銲技術,半導體製程關鍵零組件開發

最高學歷


國立交通大學機械工程研究所

德國阿亨(Aachen)工業大學材料科學研究所(學術研究)

德國多特蒙德(Dortmund)大學材料工程研究所(學術研究)

主要經歷


台北科技大學-機電學院-製造科技研究所,2002至今

大葉大學機械及自動化工程系,專任助理教授,2001/8至2002/7/5

工業技術研究院工業材料研究所,研究員,1998/12至2001/7

銲接與切割雜誌編輯委員,2000至今

研究方向


奈米材料製程﹕氣凝合成法﹔

奈米碳管製程﹕Arc-Discharge﹔

接合技術開發﹕硬銲(包括軟銲)同種及異種材料接合﹔

熔射塗層技術開發﹕大氣電漿熔射,高速火焰熔射,電弧熔射,轉移式電漿電弧銲;

物理蒸鍍製程: 電弧離子蒸鍍(Arc-PVD)﹔

瓷金粉末合成﹕機械合金法﹔

Journal Papers of SCI (2006~2012)

NO.

PAPER

Download

1 H.C. Lin, C.Y. Su, Y.H. Yu and C.K. Lin, 2012, “ Non-catalytic and substrate-free method to titania-doped W18O49 nanorods: Growth, characterizations, and electro-optical properties”, Journal of Nanoparticle Research Vol. 14 Issue 1, p665-p674.(SCI100 Impact Factor: 3.253, Materials Science, Multidisciplinary:35/225)
2 C.K. Huang, C.Y. Su and K.Y. Li, 2012, “The Effects of Chamber Height on the Vapor Chamber Performance”, Experimental Heat Transfer Volume 25, Issue 1,p1-p11.(SCI100 Impact Factor: 0.450, Engineering, Mechanical  :80/122)

3

C. H. Chang, M.C. Jeng, C. Y. Su and C. L. Chang, 2011, “A Study of Wear and Corrosion Resistance of Arc-Sprayed Ni-Ti Composite Coatings”, Journal of Thermal Spray Technology, Volume 20, Issue 6, P.1278-P.1285. (SCI100 Impact Factor: 1.844, Materials Science, Coatings & Films: :5/18)

4

C.Y. Su*, H.C. Lin, Z.K. Yang, and C.K. Lin, Nov. 23-25, 2011, “A facile route to tungsten oxide nanomaterials with controlled morphology and structure”, Particuology, Volume 9, Issue 5, P.517-P.521.(SCI100 Impact Factor: 1.317, Engineering, Chemical: 51/135)
pdf

5

P.L. Sun, C.Y. Su, T.P. Liou, C.H. Hsu, and C.K. Lin, 2011, “Mechanical behavior of TiN/CrN nano-multilayer thin film deposited by unbalanced magnetron sputter process”, Journal of Alloys and Compounds, Vol. 509, No.6, pp. 3197-3201. (SCI100 Impact Factor: 2.135, Metallurgy & Metallurgical Engineering:5/76)
pdf

6

H.C. Lin, C.Y. Su* and C.K. Lin, 2011, “High-yield fabrication of W18O49@TiO2 core-shell nanoparticles: Microstructures and optical-thermal properties”, Journal of Nanoparticle Research, Vol.13, pp. 4549-4555.(SCI100 Impact Factor: 3.253, Materials Science, Multidisciplinary:35/225)
pdf
7 W.T. Hsiao, C. Y. Su*, T. S. Huang and W. H. Liao, 2011, “The microstructural characteristics and mechanical properties of Ni-Al/h-BN coatings deposited using plasma spraying”, Journal of Alloys and Compounds, Vol. 509, No.32, pp. 8239-8245. (SCI100 Impact Factor: 2.138, , Metallurgy & Metallurgical Engineering:5/76)
pdf
8 C.Y. Su*, W.H. He, K.H. Liao, H.C. Lin, C.Y. Nieh, S.C. Liang, 2011, “The effects of the morphology on the CIGS thin films prepared by CuInGa single precursors”, Solar Energy Materials and Solar Cells Vol. 95, No.1, pp. 261-263 (SCI100 Impact Factor: 4.746, Energy & Fuels:7/79)
pdf
9 P.L. Sun, C.H. Hsu, S.H. Liu, C.Y. Su, C.K. Lin, 2010, “Analysis on microstructure and characteristics of TiAlN/CrN nano-multilayer films deposited by cathodic arc deposition”, Thin Solid Films Vol. 518, No.24, pp. 7519-7522 (SCI100 Impact Factor: 1.935, Materials Science, Coatings & Films:3/18)
pdf
10 C.Y. Su, Z.K. Yang, H.C. Lin and C.K. Lin, 2010, “The effect of processing parameters on the synthesis of tungsten oxide nanomaterials by a modified plasma arc gas condensation technique”, Journal of Nanoscience and Nanotechnology, Vol. 10, pp. 5461-5466. (SCI100 Impact Factor: 1.435, Materials Science, Multidisciplinary:86/212)

pdf

11 C.Y. Su, H. C. Lin, T. K. Yang, and C. K. Lin, 2010, “Structure and optical properties of tungsten oxide nanomaterials prepared by a modified plasma arc gas condensation technique”, Journal of Nanoparticle Research, Vol.10, pp. 5461-5466. (SCI100 Impact Factor: 3.253, Materials Science, Multidisciplinary:35/225)
pdf
12 C.T. Pan, T.T. Wu, J.K. Tseng, C.Y. Su*, W.J. Wang and J.C. Huang, 2010, ‘Mechanical behavior of metallic glasses Mg–Cu–Y using nano-indentation’, Microsystem Technologies, Vol. 16, No.4, pp. 585-593  (SCI100 Impact Factor: 1.071, Engineering, Electrical & Electronic:115/247)
pdf
13 C.T. Pan, T.T. Wu, C.F. Liu, C.Y. Su*, W.J. Wang, J.C. Huang, 2010, “Study of scratching Mg-based BMG using nanoindenter with Berkovich probe“, Materials Science and Engineering A, Vol. 527, No.9, pp. 2342-2349 (SCI100 Impact Factor: 2.101, Materials Science, Multidisciplinary:52/225)
pdf
14 C.Y. Su*, H.C. Lin, T.K. Yang, C.H. Chang, and C.K. Lin, 2009, “Tungsten Oxide Nanopowders and Nanorods Prepared by a Modified Plasma Arc Gas Condensation Technique”, Materials Transactions Vol. 50, No. 11, pp. 2593-2597. (SCI100 Impact Factor: 0.795, Metallurgy & Metallurgical Engineering:22/70)
pdf
15 C.Y. Su*, H.C. Lin and C.K. Lin, 2009, “Fabrication and Optical property of Ti-doped W18O49 Nanowires using a Modified Plasma Arc Gas Condensation Technique”, Journal of Vacuum Science and Technology B, Vol. 27, Issue 5, pp. 2170-2174. (SCI100 Impact Factor: 1.271, Engineering, Electrical & Electronic:99/247)
pdf
16 C.H. Chang, M.C. Jeng, C. Y. Su and C. L. Chang, 2009, “An investigation of thermal sprayed aluminum/hard anodic composite coating on wear and corrosion resistant performance”, Thin Solid Films, Vol.517, pp5265-5269. (SCI100 Impact Factor: 1.935, Materials Science, Coatings & Films:3/18)
pdf
17 W.T. Hsiao, W.H. Liao, C.Y. Su and M.S. Leu, 2009, “Evaluation of Hillock-like Deposition Behavior of HVOF Thermal Spray Coatings using a Rotary Shutter procedure”, Surface Engineering, Vol. 25, No. 4, pp. 313-318. (SCI100 Impact Factor: 0.633, Materials Science, Multidisciplinary:12/18)
pdf
18 Y.Y. Tsai, J.S. Su, C.Y. Su, W.H. He 2009, “Production of carbon nanotubes by single-pulse discharge in air”, Journal of Materials Processing Technology Vol.209 Issue 9, pp. 4413-4416 (SCI100 Impact Factor: 1.578, Engineering, Manufacturing:9/38)
pdf
19 C.Y. Su* and H.C. Lin, 2009, “Direct Route to Tungsten Oxide Nanorod Bundles: Microstructures and Electro-Optical Properties”, Journal of Physical Chemistry C , Vol. 113, Issue 10, pp. 4042-4046.( SCI100 Impact Factor: 4.524, Materials Science, Multidisciplinary:22/225)
pdf

20

C.Y. Su, C.T. Pan, T.P. Liou, P.T. Chen, and C.K. Lin, 2008, ”Investigation of the microstructure and characterizations of TiN/CrN nano-multilayer deposited by unbalanced magnetron sputter process”, Surface & Coatings Technology, Vol. 203, Issue 5-7, pp. 657-660. (SCI100: 2.141, Materials Science, Coatings & Films:2/18)


pdf

21

Y.Y. Tsai, J.S. Su, C.Y. Su, 2008, “A novel method to produce carbon nanotubes using EDM process”, International Journal of Machine Tools and Manufacture, 48, pp1653–1657. (SCI100 Impact Factor: 1.919, Engineering, Mechanical:6/122) (SCI100 Impact Factor: 1.919, Engineering, Mechanical:6/122)


pdf

22

C.Y. Su*, C.K. Lin, Z.K. Yang, H.C. Lin, and C.T. Pan, 2008, “Oxygen Partial Pressure Effect on the Preparation of Nanocrystalline Tungsten Oxide Powders by a Plasma Arc Gas Condensation Technique”, International Journal of Refractory Metals and Hard Materials, Vol.26, pp423-428. (SCI100 Impact Factor: 1.410, Metallurgy & Metallurgical Engineering:10/76)

pdf

23

C.T. Pan, C.Y. Su*, 2008 “Study of Micro-lens Array by Reflow Process”, Journal of Modern Optics, Vol.55, No.17, pp2845-2858. (SCI100Impact Factor: 0.988, Materials cience,Multidisciplinary:42/78)

pdf

24

C.T. Pan, S.C. Shen, C.Y. Su*, Z.S. Liu, 2008, "Study of cutting quality for TFT-LCD glass substrate", International Journal of Advanced Manufacturing Technology, Vol. 39, pp1071-1079. (SCI100 Impact Factor: 1.071, Engineering, Manufacturing:16/38)

pdf

25

C.Y. Chen, Y.-R. Lyu, C.Y. Su, H.-M. Lin, C.-K. Lin, 2007, “Characterization of Spray Pyrolyzed Manganese Oxide Powders Deposited by Electrophoretic Deposition Technique”, Surface and Coatings Technology, Vol.202, pp1277-1281. (SCI100 Impact Factor: 2.141, Materials Science, Coatings & Films:2/18)

pdf

26 C.Y. Su*, H.C. Lin, W. Lin and C.K. Lin, 2007, “Formation of tungsten oxide encapsulated in titanium oxide nanocages by a modified plasma arc gas condensation”, Nanotechnology Volume 18, Issue 15, Article number 155602. (SCI100 Impact Factor: 3.625, Materials Science, Multidisciplinary: 31/225)
pdf

27

C.Y. Su, C.S. Yang, H.C. Lin, W. Lin, 2006, “The effect of the doping elements on the optical properties of silver-based alloy layers for storage media usage”, Thin Solid Films, Vol.515, pp936-941. (SCI100 Impact Factor: 1.935, Materials Science, Coatings & Films:3/18)

pdf

28 C.K. Lin, T.J. Yang, Y.C. Feng, T.T. Tsung, C.Y. Su, 2006, “Characterization of elecrophoretically deposited nanocrystalline titanium dioxide films”, Surface and Coating Technology, Vol. 200, pp3184-3189. (SCI100 Impact Factor: 2.141, Materials Science, Coatings & Films:2/18)
pdf
29 C.Y. Su, C.K. Lin, C.R. Lin, C.H. Lin, 2006, “Polymerization-like Grafting of Thermoplastic Polyurethane by Microwave Plasma Treatment”, Surface and Coating Technology, Vol. 200, pp3380-3384. (SCI100 Impact Factor: 2.141, Materials Science, Coatings & Films:2/18)
pdf

30

W. Lin, M.S. Leu, C.K. Lin, C.Y. Su*, 2006, “The failure mechanism of diamond like coatings prepared by the filtered cathodic arc technique for minting application”, Surface and Coating Technology, Vol.201, pp4430-4435. (SCI100 Impact Factor: 2.141, Materials Science, Coatings & Films:2/18)

pdf

Journal Papers of EI (2006~2009)

NO.

PAPER

1

C. Y Su*, Y. C. Chang, H. C. Lin, C. K. Lin, C. Y. Hsu, and T. K. Yang, 2009, “Investigations on Microstructures and Gas Sensing Properties of W5O14 nanorodsProperties of W5O14 nanorods”, The Chinese Journal of Process Engineering , Vol. 9, No. 2, pp. 122-126.(EI)

2

W.T. Hsiao, W.H. Liao, M.S. Leu, and C.-Y. Su, 2007, “A splats obtaining system for thermal spray deposits”, Materials Science Forum, 561-565, pp. 1169-1172. (EI)

3

C.-K. Lin, C.-Y. Tsay, C.-Y. Chen, W.-H. Chan, C.-Y. Su, and H.-M. Lin, 2007, “Characterization and Modification of Nanocrystalline Iron Oxide Powders Prepared by an Inert Gas Condensation Technique”, Materials Science Forum, 561-565, pp. 1379-1382. (EI)

4

P.J. Cheng, S.C. Shen, C.T. Pan, C.Y Su, C.C. Hsieh, T.T. Wu, H.C. Liu, 2006, In-Plane Microgenerator with High Energy Product Magnet, Journal of the Chinese Society of Mechanical Engineers, Vol. 27, No. 1, pp. 31-36.(EI)

5

C.Y. Su*, Z.K. Yang, C.K. Lin, and W. Lin, 2006, “Tungsten Oxide nanorod Synthesized by a Modified Plasmaa Arc Gas Condensation Technique”, The Chinese Journal of Process Engineering, Vol. 2, No. 6, pp219-223(EI). (NSC-94-2216-E-027-008)

6

C.K. Lin, K.H. Chuang, C.Y. Chen, C.Y. Tsay, C.Y. Su, H.M. Lin, 2006, “Characterization of Nanocrystalline Manganese Oxide Powders Prepared by Gas Condensation Technique”, The Chinese Journal of Process Engineering, 2(6), pp235-239. (EI)


Other (2006~2010)

NO.

PAPER

1
蘇程裕*、林世進、莊謝宗揚、林文,2010,”Ni基填料真空硬銲接合碳化鎢和SKD11工具鋼之研究”,銲接與切割,Vol. 21,No.3,pp.52-58。
2
蘇程裕*、高茂森、傅冠中、蕭威典、黃財賞,2011,”微/奈米氧化鋁-氧化鈦熔射塗層之結構組織及其磨耗特性研究” ,銲接與切割,Vol. 21,No.2,pp.72-76
3
蘇程裕*、傅冠中、許正勳、林中魁、黃財賞、丁士程,2010,”添加WC或Cr2C3提升高速火焰熔射自熔合金塗層耐磨耗性質之研究”,金屬熱處理,Vol.106,pp.27-32

4

蘇程裕*、丁士程、張家華、黃財賞、林中魁、黃德宜,2009 “高速火焰熔射製作鎳基自熔合金塗層結構特性之研究”,金屬熱處理,Vol.100,pp.41-48。

5

蘇程裕*、許哲源、鄭慶民、雷敏宏,2009 “316L 與多孔性不鏽鋼薄管接合性質之研究”,銲接與切割,Vol. 19,pp.66-73。

6

李國穎、蘇程裕*,2007,”新一代均熱板的發展現況”,熱管理產業通訊,Vol.8,pp25-30。

7

蘇程裕*、駱達文、蘇嘉祥、林坤豐、黃旭璀,2007,”大氣低溫電漿表面改質技術應用於COG接合之研究”,銲接與切割,Vol.17,No.2.,pp26-33。

8

張嘉珍、呂明生、吳金寶、蘇程裕*,2007,“直流電弧離子沈積ITO透明導電薄膜研究”,真空技術,31(4),pp12-17 蔡銘修,林中魁,陳錦毅,蘇程裕,林鴻明,2006,“氣相凝結法製備奈米氧化錳粉體之特性研究”,粉末冶金會刊,Vol.31,pp244-251

9
蘇程裕、楊宗坤、林中魁、林文, 2006,“電漿電弧氣凝合成法製備氧化鎢奈米棒之研究”, The Chinese Journal of Process Engineering,2(6),pp219-223(EI)。(NSC-94-2216-E-027-008)